Gauge Mode (Bottom Timer)

Gauge mode only features depth and bottom timer functions, with no decompression tracking. Therefore, there will be no NDL or decompression stop.

Air/ Nitrox /Multi-Gas modes will be locked for 24 hours after the last gauge dive. To unlock, go to the Settings menu > System > Reset Nitrogen.

Press the C button to switch screens.
Before diving, press the B button to enter dive settings.

Top: GPS Indicator (Green indicates successful GPS fix)
Top Middle: Bottom Timer – Press the A button to start the timer; pressing A again will restart it.
Left: Water Temperature | Ascent/Descent Rate Bar (displayed during the dive)
Middle Right: Dive Depth
Bottom Right: Dive Time
Bottom Left: Average Depth
Bottom: Battery Level

Press the C button to switch screens.
Before diving, press the B button to enter dive settings.

Press the A button to lock the heading. The locked heading is indicated by a green arrow, while the relative heading is shown with a white arrow.

For example, if you lock the heading at 90 degrees, the display will show green when approaching 90 degrees.

Press the A button again to cancel the heading lock.

Press the C button to switch screens.
Before diving, press the B button to enter dive settings.